sarbi petroleum & chemicals
sarbi petroleum
  profile
  automotive lubricants
  industrial lubricants
  food grade lubricants
  automotive specialities
  additives
  car care products
  facilities
  contact us
  home
  iso certificate  
your total lubrication solution
  sarbi petroleum sarbi engineering
 
Food Grade  
 
 
Specol FG Multipurpose Lubricant
Specol FG Hydraulic Oils
Specol FG Chain Oils
   
   
   
 
 
   Specol FG Multipurpose Lubricant

Specol FG Multi-Purpose Lubricant is a lubricant specially developed, tested and approved for use in the pharmaceuticals, food and all associated industries.

Specol FG Multi-Purpose Lubricant is suitable for lubrication of sliding surfaces and all types of plain and rolling element bearings. Readily pumpable and ideal for use in multi-link centralised and automatic lubrication systems.

Specol FG Multi-Purpose Lubricant offer the following benefits:

  • Clear, white appearance
  • Good anti-wear performance
  • Good load-bearing characteristics
  • Thermally stable
  • Improved corrosion resistance
  • Excellent water resistance
  • Cost effective
   
  A] Technical Specifications
   
 
Property Test Method Typical Values
Appearance Visual Clear & Bright fluid
Colour Visual <0.5
Density at 29.5° C ASTM D 1298 0.8519
K. V. @ 40° C, cst ASTM D 45 33.00
K. V. @ 100 ° C , cst ASTM D 45 5.77
Viscosity Index ASTM D 2270 117
Pour Point, ° C ASTM D 97 -30° C
Flash Point, COC, ° C ASTM D 92 202
Cu corrosion ASTM D 130 1A
   
   
   
  B] Microbiological Evaluation
   
 
Test Parameters Values
Total Viable Count at 37° C for 48 hours NIL
Total Coliform Count at 37° C for 48 hours NIL
Aerobic Count at 55° C for 48 hours NIL
Anaerobic Count at 55° C for 48 hours NIL
Total Yeast and Mold Count NIL
   
   
   
  C] Toxicological Evaluation
   
 
Test Value Remark
Oral LD50 Albino mice > 4287.5 mg/kg Safe
   
   
   
   
  top
   
 
 
   Specol FG Hydraulic Oils

Specol FG Hydraulic Oils are a specially developed hydraulic oils for pharmaceuticals, food and allied industries for incidental food contact.

Specol FG Hydraulic Oils are based on non cyclic constituents and give superior properties over a wide temperature, typically -15 C to 160 C.

Specol FG Hydraulic Oils offer the following benefits:

  • Good anti-wear performance
  • Good load-bearing characteristics
  • Superior thermal stability
  • Improved corrosion resistance
  • Excellent water resistance
  • High performance over a wide temperature range
  • Compatibility with mineral oils and normal seals
   
  A] Technical Specifications
   
 
Property Test Method Typical Values
    32 46 68 100
Appearance Visual Clear fluid Clear fluid Clear fluid Clear fluid
Colour Visual <0.5 <0.5 <0.5 <0.5
Density @ 29.5° C ASTM D 1298 0.8518 0.8549 0.8572 0.8582
K.V. @ 40° C, cst ASTM D 45 33.76 48.20 69.86 102.56
K.V. @ 100 ° C, cst ASTM D 45 5.84 7.28 9.32 12.70
Viscosity Index ASTM D 2270 116 111 110 118
Pour Point, ° C ASTM D 97 -30° C -30° C -21° C -18° C
Flash Point, COC, ° C ASTM D 92 202 212 238 260
Cu corrosion ASTM D 130 1A 1A 1A 1A
   
   
   
  B] Microbiological Evaluation
   
 
Test Parameters Values
Total Viable Count at 37° C for 48 hours NIL
Total Coliform Count at 37° C for 48 hours NIL
Aerobic Count at 55° C for 48 hours NIL
Anaerobic Count at 55° C for 48 hours NIL
Total Yeast and Mold Count NIL
   
   
   
   
  top
   
 
 
   Specol FG Chain Oils

Specol FG Chain Oil is a specially designed lubricant for pharmaceuticals, food and allied industries. It contains anti-oxidants and corrosion resisting additives for better performance. This thermally stable fluid has been specially designed to operate with chains at extreme temperature.

Specol FG Chain Oil offer the following benefits:

  • Appropriate viscosity for ease of application
  • Thermal stability
  • High temperature "wet life" properties
  • Excellent corrosion resistance
  • Non carbonising nature
   
  A] Technical Specifications
   
 
Property Test Method Typical Values
Appearance Visual Clear & Bright fluid
Colour Visual <0.0
Density at 29.5° C ASTM D 1298 0.8570
K. V. @ 40° C, cst ASTM D 45 204.60
K. V. @ 100 ° C , cst ASTM D 45 22.37
Viscosity Index ASTM D 2270 113
Pour Point, ° C ASTM D 97 -15° C
Flash Point, COC, ° C ASTM D 92 258
Cu corrosion ASTM D 130 1A
   
   
   
   
  B] Microbiological Evaluation
   
 
Test Parameters Values
Total Viable Count at 37° C for 48 hours NIL
Total Coliform Count at 37° C for 48 hours NIL
Aerobic Count at 55° C for 48 hours NIL
Anaerobic Count at 55° C for 48 hours NIL
Total Yeast and Mold Count NIL
   
   
  top